How to unbrick Samsung Galaxy Y with stock firmware

Since the Galaxy Y launched in market by Samsung, it is always been very popular, and been searched widely over the internet. The combination of device cost, and configuration made it a good deal for phone users, and developers as well. Galaxy Y is one most sold handset from Samsung, and also got huge attention from developers. There are countless Roms, and mods for this handset, and many other opportunities to improve its performance, and usability.

But sometimes installing third-party Roms, mods, and other apps lead to bricked phone. Most probably it happens after installing a new Rom. In that case, to revive it back to working state, installing a stock firmware would be the best one can do. It happened to my Galaxy Y many times, and most of time I had to use the stock firmware. If you’ve bricked your Samsung Galaxy Y then this guide is best suitable to you.

Lets repair the bricked Samsung Galaxy Y GT-S5360 using stock firmware. First, read all the pre-requisites listed below very carefully, and prepare the device accordingly.

Pre-requisites

• These are official stock firmwares, developed, and distributed by Samsung only for Galaxy Y GT-S5360 device, and meant nothing for any other device. Don’t try’em on any other device, it could lead to very serious damage to the device.
• As it is official firmware, so it would replace custom Rom, and custom modes to stock version, and it also removes the root access from the device. It simply turn to original state.
• To perform this installation, you need a windows based PC with internet connectivity, and USB cable to connect your device to it. Windows XP, 7 or 8, any of these is recommended.
• Install proper USB driver of you Samsung Galaxy Y device on PC, so it could be detected by PC correctly. To download the latest USB drivers for Galaxy Y, visithere.
• Remember, the installing this Rom would remove everything from the internal memory of phone. That means, anything stored under the phone’s memory would be wiped out.

Downloads

→Get the stock firmware for your Galaxy Y on basis of you country from the below list:

• European Firmware – S5360_XXMI1_OXXMD1_XXMC2_wipe_by_SplitFUS2
• Indian Firmware – S5360_DDMD1_ODDMD1_DDMD1_wipe_by_SplitFUS2
• German Firmware – S5360_XXMK1_DBTML1_XXMK1_wipe_by_SplitFUS2
• Iraqi Arabic Firmware – S5360_JPMI1_OJPMI1_XXMG1_wipe_by_SplitFUS2
• Indonesia, Malaysia, Philippines, Singapore, Vietnam –S5360_DXMJ1_OLBMJ1_DXMI1_wipe_by_SplitFUS2
• 5360B Brazilian Firmware – S5360B_UTME2_ZTOMJ1_UTME1_wipe_by_SplitFUS2
• 5360T Australian Firmware (Telstra) – S5360T_AJKK3_TELKK3_AJKK3_wipe_by_SplitFUS2

→ After downloading the desire firmware zip file, extract it to safe place on your PC, and remember the location of it.

→Download the Odin Program from here (Odin 3.07.zip). Extract the zip file, and under it you’ll get a Odin3 v3.07.exe file. Remember it, we’ll be using it very soon.

How to install stock firmware on Samsung Galaxy Y

1. Firstly, on PC run the Odin3 v3.07.exe file from the extracted Odin Program zip. A new window will appear on you screen.
2. Now turn off you phone, and wait at least 5 seconds.
3. Now press, and hold Volume Down + Home + Power buttons together until a Warning! message gets appeared on phone’s screen. Then press then Volume Up button to boot into the Download mode.
4. Now connect the device to PC through USB Cable, and move on to Odin program. Once it detected the device successfully, the ID:COM section would get deflected, and Added! message will appear in message box. If nothing happens in you case, then you need to first install the USB Drivers of your phone first, and then try it again.
5. Now on Odin program perform the followings:
   1. Select the PDA button, then find, and locate the PDA named file from the extracted firmware zip file.
   2. Select the Phone button, then find, and locate the Modem named file.
   3. Select the CSC button, then find, and locate the CSC named file.
6. Make sure the Re-Partition box is unchecked, and don’t make any other changes.
7. Now click on “Start” button to start the installation process. Once it done, a PASS! would appear on Odin program. And now you can remove your device from PC.

If you’re feeling uncomfortable with above tutorial then watch below video.

Video: How to flash stock firmware on Samsung Galaxy Y

[youtube:https://www.youtube.com/watch?v=8SGqQl321RE]

Your phone would be restarting it self, and will take you to home screen very soon. Then just fill up your Google account settings to get started with it. So this ends our guide to repair the bricked Samsung Galaxy Y. Moreover, visit our best causal games list to have fun with your device.